65-Watt GaN Sensor Lamp Charger Review for Quality and Reliability

A high-quality fast-charging charger not only retains a power output of 20%, but in fact the most important technical performance is the high-power high-voltage MOS tube installed in the output USB port. In this design circuit, in order to better exert the switching protection function of the MOS tube, an alloy sampling resistor is added to the front or rear stage of the MOS tube, and a high-precision AD is configured using an integrated chip, using the characteristics of Ohm's law to set a reference voltage is used as a base, and the voltage value collected at both ends of the alloy resistor exceeds the base On time, a control signal is obtained to turn off the output of the high-power high-voltage MOS tube.

This is the Comparison Between a 65 Watt Sensor Lamp vs a generic fast charger

Overload Protection and Power Consistency

The USB Type-A or Type-A port will have no current output, which naturally protects the product from overheating the transformer due to overload output. This prevents the occurrence of fires caused by long-term overloading of the product. At the same time, this design also ensures that the output power of each charger is highly consistent, almost enabling the maximum power error of each charger to be within the range of 0.1 watts.

High-End vs. Copycat Fast Chargers: Key Differences

In this way, if there is a fast charging charger with two output ports of Type-C and Type-A, then the above-mentioned high-power and high-voltage MOS tubes, alloy sampling resistors, and high-precision AD chips will be added to each USB output port. Such a high-spec design will increase the cost a lot. Those copycat fast-charging chargers do not have these high-power high-voltage MOS tubes, alloy sampling resistors, high-precision AD chips, etc., so the cost is very different from the fast-charging chargers configured with high-standard solutions. Therefore, the difference between a high-end fast charger and a copycat fast charger lies in whether the output current is consistent with the rating and whether there is short-circuit protection.

Output Testing and Smart Charger Features

To verify whether the output current is consistent with the rated current, you need to use a fast charge charger analyzer, which can also test the maximum output power. Our newly developed smart fast charger also uses high-power high-voltage MOS tubes, alloy sampling resistors, and high-precision AD chips. On this basis, we add human body infrared induction sensors, lithium batteries, microcontrollers, and full-spectrum LED lights, speakers, etc. In order to have more functions.

Cost-Effective Smart Charger with Advanced Functions

As a result, this smart charger is far more cost-effective than the counterfeit fast charger, and its functions are also very different. The smart charger realizes fast charging of mobile phones, smart sensor automatic night lights, and smart sensor automatic alarms. Touch the buttons to adjust brightness, color temperature, etc. The structural design that can store the plug makes the product easier to carry.

Smart Charger for Quick Charging and Enhanced Safety

As long as you bring this smart charger, whether in the office or in the bedroom at home, you can quickly charge your mobile phone and provide smart lighting functions. Whether you are traveling or camping, the induction alarm function of this smart charger can also remind you of the approach of strangers to avoid accidents.

Smart Charger for Elderly Care with Induction Alarm

In terms of caring for the elderly with Alzheimer's disease, this mobile phone charger with intelligent induction alarm function is a good helper. When the elderly walks out of the monitoring range, the alarm will sound, which really makes the guardians much more relaxed. The warm light of the induction lamp is soft and non-dazzling. The specific induction area can be used in the bedroom as a bedside induction lamp.

Conclusion

In conclusion, the smart charger offers a highly functional and cost-effective solution for both everyday use and specialized needs. With its advanced features like fast charging, smart lighting, and security alarms, it stands out from counterfeit alternatives. Its ability to support mobile devices while providing safety features, such as the induction alarm for elderly care, makes it an invaluable tool in various environments. Whether at home, in the office, or on the go, this smart charger ensures convenience, reliability, and peace of mind.