The sensor alarm function and operation steps are as follows:
- When you quickly double-click the touch button for the first time, you will hear a voice prompt, which means that the human body sensing alarm mode has been turned on. You need to wait for 30 seconds each time you switch to the human body sensing alarm mode, and there is no need to wait after that. When a person comes to the sensing area, the product immediately plays an alarm ringtone. It automatically stops playing the alarm ringtone 30 seconds after the person leaves. It automatically enters a low-power state about 6 seconds after stopping the broadcast. The automatic alarm ringtone operation is equally effective whether it is day or night.
- Double-click the touch button quickly for the second time, and you will hear a long beep. At this time, the human body sensor alarm has been canceled, and the LED light operation functions are all valid.
- Sensor night lights and sensor alarm and anti-theft systems cannot be used at the same time. That is to say, when we start the alarm and anti-theft system, the night light function is automatically turned off; when we turn off the alarm and anti-theft system, the night light function is automatically turned on.
- Built-in 20*30mm Mylar speaker with a speaker power of 1W. This speaker is specially used for induction alarm systems with a sound pressure of 98dB.
- The sensor device of the sensor anti-theft alarm system is shared with the sensor night light. It is an infrared sensor with an effective distance of 4 meters (the maximum sensing distance is 10 meters, but it is unstable). The sensing angle is 60 degrees, which is the half area without plating on the cover of the infrared sensing device, which is the same as the sensing area of the induction night light.
